請幫忙推薦AC診斷用Manifold Gauge Set

請幫忙推薦AC診斷用Manifold Gauge Set. 主要有於汽車AC System 診斷, refrigerant, 如能兼用 Home AC system would be even better. Budget < $100. Thanks.

所有跟帖: 

你可能需要更多吧。 -隱睾- 給 隱睾 發送悄悄話 (142 bytes) () 02/26/2013 postreply 18:37:37

多謝! 請指點 What else do I need? -Gulang- 給 Gulang 發送悄悄話 (55 bytes) () 02/26/2013 postreply 19:15:03

回複:你還是先去買兩桶氣吧。 -追風大老虎- 給 追風大老虎 發送悄悄話 追風大老虎 的博客首頁 (72 bytes) () 02/27/2013 postreply 12:20:33

這事兒我幹過 -追風大老虎- 給 追風大老虎 發送悄悄話 追風大老虎 的博客首頁 (103 bytes) () 02/27/2013 postreply 13:18:03

Great! Thank you 追風大老虎. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/27/2013 postreply 18:49:42

I got one, it also good for home AC too I think -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (264 bytes) () 02/26/2013 postreply 19:53:20

Thanks for the pictures. 你這個是什麽牌子的? -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/27/2013 postreply 18:13:12

是在auto zone 還是advance auto parts買的,沒牌子好像 -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (43 bytes) () 02/27/2013 postreply 21:07:18

Just ordered one ... -Gulang- 給 Gulang 發送悄悄話 (40 bytes) () 03/01/2013 postreply 17:55:49

Manifold Gauge Set 用不了100刀 -x88- 給 x88 發送悄悄話 (313 bytes) () 02/27/2013 postreply 09:12:44

Thanks for the info! I will check them out. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/27/2013 postreply 18:15:13

Depends where you want to use it -JunkYarDDo- 給 JunkYarDDo 發送悄悄話 (284 bytes) () 02/27/2013 postreply 10:58:27

Thanks. good to know. Only did car AC. -x88- 給 x88 發送悄悄話 (0 bytes) () 02/27/2013 postreply 13:14:33

Great info! It is R-134a for car. So can I use the same hose for -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/27/2013 postreply 18:19:23

我的難題是:汽車AC冷媒已漏光,compressor not running due to zero pressure, so -Gulang- 給 Gulang 發送悄悄話 (57 bytes) () 02/27/2013 postreply 19:00:27

拔下低壓保護開關插頭,用曲別針短路。 -追風大老虎- 給 追風大老虎 發送悄悄話 追風大老虎 的博客首頁 (0 bytes) () 02/27/2013 postreply 21:14:42

要換我的話不會這樣幹 -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (164 bytes) () 02/27/2013 postreply 21:28:50

油是不會揮發的,再加油就擠了冷媒的空間了。 -追風大老虎- 給 追風大老虎 發送悄悄話 追風大老虎 的博客首頁 (0 bytes) () 02/28/2013 postreply 04:01:07

這得看是怎麽漏的 -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (45 bytes) () 02/28/2013 postreply 10:11:03

恩,我鬆冷媒接口的時候,泄露口周邊是有很大一片油跡的. -SmallBlock- 給 SmallBlock 發送悄悄話 (0 bytes) () 02/28/2013 postreply 11:25:09

所以還是加點油保險 -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (0 bytes) () 02/28/2013 postreply 15:17:12

add a can of compressor oil and some R134a, get it running then -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (218 bytes) () 02/27/2013 postreply 21:17:30

我上麵的回帖有我用過的全套:抽空機,gauge set, connector ... 唯一 -x88- 給 x88 發送悄悄話 (517 bytes) () 02/28/2013 postreply 10:25:11

修車不忘環保,有大愛, 讚一個! -SmallBlock- 給 SmallBlock 發送悄悄話 (0 bytes) () 02/28/2013 postreply 11:28:30

嗬嗬,謝一個! -x88- 給 x88 發送悄悄話 (0 bytes) () 02/28/2013 postreply 18:12:09

最初加冷卻液不能啟動發動機,即使啟動了,由於沒有壓力,壓縮機的CLUTCH也不會ENGAGE。正確步驟大致 -x88- 給 x88 發送悄悄話 (1467 bytes) () 02/28/2013 postreply 19:47:57

感謝追風大老虎,MoonRiverttt, x88, SmallBlock, and soccer88, 分寶貴經驗。 -Gulang- 給 Gulang 發送悄悄話 (2044 bytes) () 02/28/2013 postreply 20:21:56

回複:感謝追風大老虎,MoonRiverttt, x88, SmallBlock, and soccer88, 分寶貴經驗。 -追風大老虎- 給 追風大老虎 發送悄悄話 追風大老虎 的博客首頁 (239 bytes) () 02/28/2013 postreply 21:42:58

謝追風大老虎, for the information。 -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 03/02/2013 postreply 10:28:47

let me ask you this -MoonRivertttt- 給 MoonRivertttt 發送悄悄話 (385 bytes) () 02/28/2013 postreply 22:13:04

True, the freon bottle only works when the AC pressure is still -x88- 給 x88 發送悄悄話 (409 bytes) () 03/01/2013 postreply 08:12:19

I used an old simple gauge comes with the refrigerant can, conne -Gulang- 給 Gulang 發送悄悄話 (195 bytes) () 03/01/2013 postreply 17:51:29

Don't use vacuum pump unless the AC has been fully discharged. -x88- 給 x88 發送悄悄話 (408 bytes) () 03/01/2013 postreply 07:48:50

Thanks, x88, for the advice. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 03/01/2013 postreply 17:54:05

Gulang, 聽你的描述,我覺得 -x88- 給 x88 發送悄悄話 (376 bytes) () 03/02/2013 postreply 12:09:55

Great, x88, thanks for sharing the experience. One update ... -Gulang- 給 Gulang 發送悄悄話 (807 bytes) () 03/02/2013 postreply 20:16:18

Definitely Vapor if by high pressure port. By low pressure port, -x88- 給 x88 發送悄悄話 (361 bytes) () 03/03/2013 postreply 07:06:37

Thanks x88. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 03/04/2013 postreply 18:47:10

You have to vaccum the system before you fill the freon in. -JunkYarDDo- 給 JunkYarDDo 發送悄悄話 (115 bytes) () 03/04/2013 postreply 07:20:41

Thank you, JunkYarDDo. Just got my MGS, will get a reading to se -Gulang- 給 Gulang 發送悄悄話 (270 bytes) () 03/04/2013 postreply 18:55:39

說說冷媒的添加和內部潤滑 -SmallBlock- 給 SmallBlock 發送悄悄話 (483 bytes) () 02/27/2013 postreply 21:12:53

同意。大修汽車AC還是要的技術的。記得 -x88- 給 x88 發送悄悄話 (145 bytes) () 02/28/2013 postreply 10:35:57

厲害,有空擺一擺 -soccer88- 給 soccer88 發送悄悄話 soccer88 的博客首頁 (0 bytes) () 02/28/2013 postreply 12:15:40

沒問題,大家互相學習。 -x88- 給 x88 發送悄悄話 (0 bytes) () 02/28/2013 postreply 18:09:55

Agreed, thanks. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/28/2013 postreply 20:30:03

Thanks SmallBlock. -Gulang- 給 Gulang 發送悄悄話 (0 bytes) () 02/28/2013 postreply 20:27:37

^_^ 不謝, 一起學習! -SmallBlock- 給 SmallBlock 發送悄悄話 (0 bytes) () 02/28/2013 postreply 20:54:26

請您先登陸,再發跟帖!