Thank you very much for the reply

來源: templa 於 2007-06-06 07:30:46 [] [舊帖] [給我悄悄話] 本文已被閱讀： 次 (320 bytes)
回答: LAN card connection setup in RHEL 4.5 由 templa 於 2007-06-05 14:01:50
I tried, but it still didn't work. From "dmesg" command, it showed that "forcedeth" has been mapped to eth0, but if I tried to activate eth0, it just said "Determing IP address for eth0 ... failed". BTW, if I use static IP addressing, the system can ping its own IP, but not the gateway, or other IPs in my LAN.

所有跟帖： 

• 回複：Thank you very much for the reply -butdie- ♂ 給 butdie 發送悄悄話 (302 bytes) () 06/06/2007 postreply 08:19:55

請您先登陸，再發跟帖！

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”