個人資料
  • 博客訪問:
正文

Fixing a Ladder

(2024-06-11 15:46:27) 下一個

A ladder was broken (view from the outside):

Broken (view from the inside):

So I decided to fix it. Basically I needed to make two pieces of brass plates and then use rivets to fix these two pieces on the broken plastic parts on the ladder.

Some tools used (always use a face shield):

1. Make one piece of brass plate (for the inside piece).

Cut a piece of brass sheet:

Using a reciprocating saw:

Cut it to the black mark:

Cut the other side of the piece:

Polish the edges and sides:

Try to make a hole (missing a picture with a hole in the area with the red circle):

the dent in the red circle was done wuth a center punch and then the piece was drilled:

2. Make another piece (for the outside):

Drill holes:

 

Polish the edges and sides:

3. Use rivets and a rivet tool to fix the two brass plates on the ladder:

 

Grind the sharp piece off with a grind stone:

The grind stone:

The inside view:

The fixed ladder:

The mess after several hours, several pieces of torn paper were from drilling holes with a yellow page book:

 

 

[ 打印 ]
閱讀 ()評論 (0)
評論
目前還沒有任何評論
登錄後才可評論.