can be re-used. The tech can recover the refrigerant from the system, add back the accumulator (critical for high pressure system), pressure test the system for leak detection, then evacuate -pressure hold, add back the used refrigerant, test the system for normal operation (high and low pressures, subcooling temp per spec). This may take several hours. The old accumulator may be irreparable (the HVAC tech can tell you) and thus a new accumulator is needed for replacement.
Ask the HVAC tech. I believe the used refrigerant (R-410A?)
所有跟帖:
• 謝謝,你這個是對的。請教一下“then evacuate -pressure hold, add back the us -Austin8- ♀ (545 bytes) () 07/11/2023 postreply 17:21:52
• To make sure there is no leak in the system. -FeloguardAI- ♂ (0 bytes) () 07/11/2023 postreply 19:02:13
• Thanks -Austin8- ♀ (0 bytes) () 07/12/2023 postreply 08:25:56