the design is stupid, the Allen key size is so small that the hex hole gets easily torn up. I guess there is nothing to lose to drill out the screw and part of the handle. You will need a new handle, about 20 dollars.
I had similar problem also with Delta.
所有跟帖:
•
從handle 根部鋸斷,別損傷了handle,割下後再試一下能否把六角螺杆擰出來。用torch 燒一下,一般能取出來。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
14:03:41
•
這很難做到,從把手和麵板的縫裏鋸。而且CATRIDGE那個軸是很硬的金屬,不像把手是鋁的或是銅的。就別在乎把手那幾個錢了
-borisg-
♂
(0 bytes)
()
02/01/2025 postreply
14:28:19
•
不應在乎。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
15:29:42
•
電鋸割比較粗暴,但是我常用的手段。換sink faucet 懶得鑽底下擰螺絲,直接從上麵鋸掉,或用錘子砸掉。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
16:21:20
•
get a basin wrench...
-borisg-
♂
(0 bytes)
()
02/01/2025 postreply
16:22:08