How to set Slave for SATA Hard Disk?

來源: 禪城小子 於 2006-02-25 15:49:46 [] [舊帖] [給我悄悄話] 閱讀數 : (769 bytes)

Aleady have an IDE with the Windows installed on, want to add a Hard Disk. The additional HD is a SATA one, want to keep the old one as Master and new one as Slave, but found no way to set jumper for the SATA one. Anyone has any ideas?
If leave as default, in BIOS, it picks up the SATA but as another Master, however in Windows, the SATA one does not show. Tried to move the jumper on the SATA one to different positions, but the result is the same, Master in BIOS, nothing shown in Windows. As many would know, the jumper pins on a SATA is different to those on an IDE one. There are 4 pins, but there is only 1 row, while in an IDE one, there are 8 pins together, on 2 rows.
My SATA Hard Disk is a Maxtor DiamondMax 10, 250 GB.
Could any expert help please?

所有跟帖： 

• Did you try to use MaxBLAST? -LearningandDoing- ♂ 給 LearningandDoing 發送悄悄話 (226 bytes) () 02/25/2006 postreply 18:05:51

• Sad that dun hav CD w/ HD! but fixed it, pls come in... -禪城小子- ♂ 給 禪城小子 發送悄悄話 (708 bytes) () 02/25/2006 postreply 18:20:57

請您先登陸，再發跟帖！