Netgear wireless router help!

來源: bluepebble 於 2003-09-13 08:30:00 [] [舊帖] [給我悄悄話] 閱讀數 : (474 bytes)
本帖於 2004-02-06 15:24:48 時間, 由普通用戶 old-cotton 編輯

When I installed MR314 and linked my computer to it using MA101, everything worked fine. I use DHCP so my computer has a IP address of 192.168.0.3. However, after a while, one day when I start the computer, I found the IP address was changed to 192.168.2.x. Although I can still browse the internet, I can never connect to MR314's admin page. Port forward doesn't work either because the IP address was changed. Could any expert here tell me how to fix this? Thanks so much!



--文學城www.wenxuecity.com--

所有跟帖： 

• 看一下手冊中有無提到如何動態分配IP使之與網卡MAC地址對應 -^@^,,)~- ♀ 給 ^@^,,)~ 發送悄悄話 (0 bytes) () 09/13/2003 postreply 09:25:00

• 或者關掉DHCP直接用靜態IP不就結了 -?- ♀ 給 ? 發送悄悄話 (0 bytes) () 09/13/2003 postreply 09:49:00

• 回複：Netgear wireless... -NetLooker- ♀ 給 NetLooker 發送悄悄話 (337 bytes) () 09/13/2003 postreply 09:56:00

• haha, that's funny -?- ♀ 給 ? 發送悄悄話 (0 bytes) () 09/13/2003 postreply 10:29:00

• Thanks, I think that should be -bluepebble- ♀ 給 bluepebble 發送悄悄話 (237 bytes) () 09/13/2003 postreply 16:24:00

請您先登陸，再發跟帖！