回複:how to setup the network?

本文內容已被 [ ohyouprism ] 在 2004-02-06 15:24:48 編輯過。如有問題,請報告版主或論壇管理刪除.

What is wrong with your network?
1. is your network cable connected?
2. go to cmd prompt, type ipconfig, did it give you any useful information? What is that different from the computer that is working? check ip (should be different), then net mask etc.
3. Check the TCP/IP setting, make sure yours is similar to the computer that is working correctly.



--文學城www.wenxuecity.com--
請您先登陸,再發跟帖!