You won't be able to see it if it leaks

來源: pts 於 2011-01-25 10:38:17 [] [舊帖] [給我悄悄話] 閱讀數 : (550 bytes)
本文內容已被 [ pts ] 在 2011-01-25 14:04:55 編輯過。如有問題，請報告版主或論壇管理刪除.

Do the following to find out

1. Put all the valves back to where they belong (make sure each of them goes back to exact the same spot it came from) and make sure they are seated properly

2. Align the cylinder head such that bottom surface of the valve(s) you want to test is level and then pour some engine oil to the surface. If the oil leaks thru the seam badly, the valve has a leak problem

You can try to fix the leak with a special tool and some kind of sanding past (I actually don't what it is called in english)

所有跟帖： 

• 謝謝！好主意，你可以用漢字告訴我，用漢語拚音也成。 -triangle- ♂ 給 triangle 發送悄悄話 (0 bytes) () 01/25/2011 postreply 10:44:40

請您先登陸，再發跟帖！