Another suggestion

來源: 心字頭上一把刀 於 2010-05-22 13:02:54 [] [舊帖] [給我悄悄話] 閱讀數 : (485 bytes)

Sounds like your problem occurred right after your DIY. One possibility is that you accidentally did something else without knowing it. If one of your engine cylinders is not working (say due to bad spark plug or the wire connecting to the spark plug), then you'll experience loss of power. In this case, I suggest you check the wire connection that goes to the spark plug. Many years ago I had a bad wire connection to spark plug and everything appears to be fine until going uphill.

所有跟帖： 

• 好建議。這也正是我下一步想做的事。 -十萬個怎麽辦- ♀ 給 十萬個怎麽辦 發送悄悄話 (0 bytes) () 05/22/2010 postreply 13:18:26

請您先登陸，再發跟帖！