If losing power occurred right after IACV cleaning, then

來源: 心字頭上一把刀 於 2010-05-22 12:14:48 [] [舊帖] [給我悄悄話] 閱讀數 : (347 bytes)

try to focus on this area(air intake). I remember there is a thick tubing attached to the section which connects the airfilter box and manifold. It was the most difficult one to remove and it's thick because it has a heat insulation as outer layer for shielding. Make sure the inside tubing is plugged in instead of just the outer shield tubing.

所有跟帖： 

• 這也許是關鍵點。 我會去再檢查一下。 謝謝。 -十萬個怎麽辦- ♀ 給 十萬個怎麽辦 發送悄悄話 (0 bytes) () 05/22/2010 postreply 12:49:00

• Another suggestion -心字頭上一把刀- ♂ 給 心字頭上一把刀 發送悄悄話 (485 bytes) () 05/22/2010 postreply 13:02:54

• 好建議。這也正是我下一步想做的事。 -十萬個怎麽辦- ♀ 給 十萬個怎麽辦 發送悄悄話 (0 bytes) () 05/22/2010 postreply 13:18:26

請您先登陸，再發跟帖！