請教一下開手動檔的高手們

該如何平滑的從1檔換到2檔? 我現在十次隻能有1-2次換的好, 其他時候總是能感到抖動. 我都有點搞不清是換早了還是晚了.

Transmission gear ratio (1st) 3.77
Transmission gear ratio (2nd) 2.04
Transmission gear ratio (3rd) 1.37
Transmission gear ratio (4th) 1.05
Transmission gear ratio (5th) .85
Transmission gear ratio (6th) .71

所有跟帖： 

• 踩摘轟踩掛 -殺雨- ♂ (0 bytes) () 11/03/2009 postreply 08:14:06

• 仿佛又見到了10多年前教我開大解放的老師傅 -Fexpedition- ♂ (40 bytes) () 11/03/2009 postreply 08:32:43

• 1 to 2 is hard to be smooth because -Roadster- ♂ (450 bytes) () 11/03/2009 postreply 11:41:46

• If its BMW, there is another reason -Roadster- ♂ (37 bytes) () 11/03/2009 postreply 20:57:39

• 謝謝樓上兩位, 繼續問檔位問題 -Fexpedition- ♂ (89 bytes) () 11/03/2009 postreply 12:24:26

• Normal -Roadster- ♂ (120 bytes) () 11/03/2009 postreply 12:34:46

• 一檔啟動後就可以換２檔。我有時也用２檔啟。 -k26s- ♀ (0 bytes) () 11/03/2009 postreply 12:53:34

• 依稀記得有篇文章說2檔起步傷2級齒輪和捏合片 -Fexpedition- ♂ (16 bytes) () 11/03/2009 postreply 14:02:36

• 半離合過程過長容易傷捏合片 -smallCrab- ♂ (46 bytes) () 11/03/2009 postreply 14:12:03

• 關鍵多練 -smallCrab- ♂ (155 bytes) () 11/03/2009 postreply 14:08:08

• 注意Rev Matching. -白眼狼- ♂ (343 bytes) () 11/03/2009 postreply 16:08:07

• 樓上的高手們一並謝過 -Fexpedition- ♂ (0 bytes) () 11/03/2009 postreply 18:34:11