1 to 2 is hard to be smooth because

來源: Roadster 2009-11-03 11:41:46 [] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (450 bytes)
the gear ratio difference is very big.

Likely RPM drops too much when you release the clutch. You may try to smoothly give a little gas in the meantime smoothly releasing clutch. Smoothly here means no pause at any point, not too fast, not too slow, but constant relatively slow speed.

Practice more and after a few thousand miles, you will be much better.

Having said that, slight jerk from 1 to 2 shift is no big deal.

所有跟帖: 

If its BMW, there is another reason -Roadster- 給 Roadster 發送悄悄話 (37 bytes) () 11/03/2009 postreply 20:57:39

請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”