試試 reset the D700 to factory default? 。。。。

來源: GuShang 2012-07-10 05:26:50 [] [博客] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (607 bytes)

Instructions

1
Rotate the "Power" switch to the "On" position to turn on the Nikon D700 camera.

2
Press the "Qual" button, located on the top left of the camera, with one finger and hold it while also pressing the "Exposure Compensation" button, which is marked with a plus-minus icon and is located on the top right of the camera.

3
Wait for more than three seconds while still holding the buttons down, until the control panel turns off briefly while the camera resets itself to the factory default settings. Release the buttons.


請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”