No, you have to get into Bios

1. Restart your computer
2. At beginning of Post, Press Del key (that is when system is testing your processor and memory.)
3. Depending your Bios. In my computer, I have to Select Advance => Chip Configuration => AGP mode => select 4x, 2x, or 1x.
4. Save and exit. System will restart again.

所有跟帖： 

• 謝謝你，我現在試試 -disoui- ♀ (0 bytes) () 08/05/2005 postreply 20:43:42

• 謝謝你，按照你說的我做了一遍，好像解決了，開機到現在 -disoui- ♀ (131 bytes) () 08/05/2005 postreply 20:56:41

• No problem. Glad to hear that -Flyboat- ♀ (5 bytes) () 08/05/2005 postreply 20:59:22

• 麻煩你了，要不我在試試選擇128M的，不過這次開機這麽半天 -disoui- ♀ (24 bytes) () 08/05/2005 postreply 21:01:01

• 說得太早了。。。。。剛剛又黑了一次 -disoui- ♀ (0 bytes) () 08/05/2005 postreply 20:59:24

• How much ram do you have? -Flyboat- ♀ (0 bytes) () 08/05/2005 postreply 21:10:02

• & what kind of MB do you have? -Flyboat- ♀ (0 bytes) () 08/05/2005 postreply 21:11:43

• Install Sandra 2005. That -Flyboat- ♀ (79 bytes) () 08/05/2005 postreply 21:24:57

• 到現在都很正常，再出問題我再安裝 -disoui- ♀ (126 bytes) () 08/05/2005 postreply 21:30:46

• 512，我把graphics aperture改成128M了 -disoui- ♀ (14 bytes) () 08/05/2005 postreply 21:11:49

• 回複：No, you have to get into Bi -michaelliu- ♂ (340 bytes) () 08/06/2005 postreply 22:43:27