WinXP should have 1394 driver

by default. You don't have to install anything. I use two
1394 cards based on VIA chipset and TI chipset respectively.
They work just fine. The only thing you can do is to try
another 1394 card based on TI chipset on your PC to see what
happens. I have never had this kind of problem before.

By the way, why don't you try your 1394 card on a different PCI
slot to see if that make any difference. Good luck.

所有跟帖： 

• 謝謝. 我可能找到原因了. 但不知怎麽辦? 誰會設置這個呀? -老靴- ♂ (570 bytes) () 04/21/2005 postreply 09:50:15

• 把螺絲去掉換個插槽不就得了 -ftaaaaaaaa- ♀ (0 bytes) () 04/21/2005 postreply 09:58:11

• 要是這麽簡單我也不上來問了. -老靴- ♂ (155 bytes) () 04/21/2005 postreply 10:06:44

• 老靴，你用的什麽破機器呀！怎麽連最基本的標準都不符合？標準卡 -都插不進去？貼照片吧- ♀ (0 bytes) () 04/21/2005 postreply 11:56:26

• 試一試下麵的手順 -可能有幫助- ♀ (240 bytes) () 04/27/2005 postreply 00:09:47