回複:請教個家庭網絡問題

1. Computer to computer use cross over cable.
2. create workgroup in both computers
3. set their IP address in one network
4. ping each other.
Then peer to peer network should be done.

Client server network
1. Hub-PC, Switch-PC, Straignt through cable
2. Router-PC, cross over cable
3. Router config Roll-over cable
4. Install server OS in server PC, workstation OS in client PC
5. Config TCP-IP, set IP address, gateway, subnet mask on both PC

6. Ping each other

Then it's done.

所有跟帖: 

回複:回複:請教個家庭網絡問題 -thx....- 給 thx.... 發送悄悄話 (12 bytes) () 05/31/2004 postreply 07:54:06

請您先登陸,再發跟帖!