回複:How to check USB is 1.0 or 2.0

來源: USB2.0 2004-05-25 17:14:50 [] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (1225 bytes)
How do I know if my PC has USB 2.0? Add Your Notes
You can identify whether your PC has Hi-Speed or not relatively easy. Open Device Manager and expand the Universal Serial Bus section. There should be an “Enhanced” USB host controller present.

Windows 98 systems may use a different name, because Hi-Speed USB drivers in these operating systems are not provided directly from Microsoft (Windows ME, 2000 and XP get their drivers through Windows Update).

These drivers are provided by the manufacturer, and may carry the maker’s name (i.e. ADS, Belkin, IOGear, Siig, etc.). There should also be two “standard” version USB host controllers present as well. They are embedded in the USB chip which routes the differing USB speeds accordingly without user intervention.

There are currently 6 manufacturers of the Hi-Speed USB host silicon themselves:

ALi (Acer Labs)

Intel

NEC

SiS

VIA

nVidia (shows as “Standard” controller – see illustration above)

Any other brand name that appears in Device Manager would likely be an add-in Hi-Speed USB PCI card. The makers above do not make add-in cards, but they do make the chips that are used in them.
請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”