大師, 求救, voip stops working after I changed router

來源: 密碼1 於 2011-09-24 23:32:33 [] [舊帖] [給我悄悄話] 閱讀數 : (406 bytes)

Registration state always shows "failed" for both line 1 and line2 after I changed the router.

The old linksys router stopped working. The new router's IP is 192.168.200.1 instead of 192.168.1.1, which was used by the old router. So I changed the primary DNS and gateway of the SPA1001 to this new address 192.168.200.1. Nothing else I changed on the SPA1001.

Thanks a lot.

所有跟帖： 

• 把ip也要由192.168.1.#改成192.168.200.# -fitwxc- ♂ 給 fitwxc 發送悄悄話 fitwxc 的博客首頁 (0 bytes) () 09/24/2011 postreply 23:44:24

• dhcp already assigned 192.168.200.# -密碼1- ♀ 給 密碼1 發送悄悄話 (182 bytes) () 09/25/2011 postreply 06:45:10

• 停用router的firewall. -fitwxc- ♂ 給 fitwxc 發送悄悄話 fitwxc 的博客首頁 (0 bytes) () 09/25/2011 postreply 12:53:18

• 感謝fitwxc大師, firewall IS the problem. -密碼1- ♀ 給 密碼1 發送悄悄話 (0 bytes) () 09/25/2011 postreply 21:26:32

請您先登陸，再發跟帖！