VoIP User X-Lite Setup
Download the X-Lite software from the Xten Website download page.
Once installed, if your PC is behind a NAT connection (it probably is if you have an ADSL router of any kind, or are sharing an internet connection on a network) then you'll need to do some port mapping, directing the following ports to the PC on which you have installed X-Lite. See your ADSL routers guide as to how to do this. The required port maps for a basic X-Lite setup are:-
UDP 3478
UDP 5060
UDP 8000
UDP 8001
Once you have set your port maps if required, launch the X-Lite application.
To setup, click the menu button highlighted below.
This will bring up the main setup menu for X-Lite.
Double click on "system settings", which takes you to the following menu.
Double click on "SIP Proxy"
Finally, double click on the first entry marked "default" (if this is your first setup of X-Lite, your entry will not show as "voipuser.org" but simply "default".
Change "Display Name" to your name.
Username should be set to your VoIP User site member name.
Password is your VoIP User website password.
Domain Realm is voipuser.org. SIP Proxy should be set to "sip.voipuser.org".
Double-Click on "Send Internal IP" and select "never".
The rest you can leave at the default settings and you will end up with something looking like the above.
Click the close window "X" at the top right hand corner of the setup dialogue to close it.
X-Lite should now log itself into our SIP server and you can now dial out to any landline in Countries we have access to, and people can call you on your X-Lite software phone by dialling your allocated UK 0844 number.
Download the X-Lite software from the Xten Website download page.
Once installed, if your PC is behind a NAT connection (it probably is if you have an ADSL router of any kind, or are sharing an internet connection on a network) then you'll need to do some port mapping, directing the following ports to the PC on which you have installed X-Lite. See your ADSL routers guide as to how to do this. The required port maps for a basic X-Lite setup are:-
UDP 3478
UDP 5060
UDP 8000
UDP 8001
Once you have set your port maps if required, launch the X-Lite application.
To setup, click the menu button highlighted below.
This will bring up the main setup menu for X-Lite.
Double click on "system settings", which takes you to the following menu.
Double click on "SIP Proxy"
Finally, double click on the first entry marked "default" (if this is your first setup of X-Lite, your entry will not show as "voipuser.org" but simply "default".
Change "Display Name" to your name.
Username should be set to your VoIP User site member name.
Password is your VoIP User website password.
Domain Realm is voipuser.org. SIP Proxy should be set to "sip.voipuser.org".
Double-Click on "Send Internal IP" and select "never".
The rest you can leave at the default settings and you will end up with something looking like the above.
Click the close window "X" at the top right hand corner of the setup dialogue to close it.
X-Lite should now log itself into our SIP server and you can now dial out to any landline in Countries we have access to, and people can call you on your X-Lite software phone by dialling your allocated UK 0844 number.
選擇“Disable on www.wenxuecity.com”
選擇“don't run on pages on this domain”
