設置Router的Port TRiggering或Port forwardind

如果用Port Triggring, 則ATA可以用動態IP，即從DHCP獲得IP。
下麵是Port Triggering的具體的設置：
Name:pap2 enable:Yes protocol:UDP port raige:5060:5061 session chaining:TCP/UDP session interval:0 sec address repace:TCP/UDP active:Yes

Name:voice enable:Yes protocal:TCP port raige:16384:16482 session chaining:TCP/UDP session interval:0 sec address replace:TCP/UDP active:Yes


如用Port Forwarding則ATA必須用固定IP，ATA不能用DHCP，IP必須寫入ATA，例如192.168.0.10.
下麵是具體的設置：
name:pap2 port start:5060 port end:5061 ip:192.168.0.10 active:Yes

name: voice port start:16384 port end:16482 IP:192.168.0.10 active:Yes

另外ATA上必須選擇所有的NAT Yes Available

所有跟帖： 

• 我的Netgear router設置界麵有不同 -wxcqt- ♂ (454 bytes) () 08/07/2010 postreply 19:41:05

• 回複：name can be any thing, cat or dog. port is right -chat092- ♂ (0 bytes) () 08/08/2010 postreply 03:51:19

• Sipura SPA設置中找不到有關NAT的設置 -WXCQT- ♂ (127 bytes) () 08/07/2010 postreply 20:04:34