回複：Router porting problem:我的router is 2wire Gateway,

實際上你要定義兩個port forwarding，除了port range外，別的都選default。 第一個應該選UDP


Protocol: TCP *UDP
Port (or Range): From: 16384 to 16482

Protocol Timeout (seconds):
Map to Host Port:

Default = the same port as defined above.
Application Type: None

第二個是 port range 是5060 到5061，

Protocol: TCP *UDP
Port (or Range): From: 5060 to 5061

Protocol Timeout (seconds):
Map to Host Port:

Default = the same port as defined above.
Application Type: None

每一個定義都要取一個名字。然後加到SipuraSPA下麵。再到Firewall summary 看看SipuraSPA後麵是不是有這兩個名字。

所有跟帖： 

• 回複：回複：Router porting problem:我的router is 2wire Gateway, -houston1997- ♀ (88 bytes) () 12/24/2009 postreply 15:02:00

• 不要選別的，隻選你定義的。 -出入自在- ♂ (0 bytes) () 12/24/2009 postreply 15:04:06