如何通過外接CD-ROM將x61的VISTA換成xp pro?

問題如下，試了好幾次，都是這個問題。

Basically, I got my X61s with vista basic, and I want to replace vista with XP pro. What I did are:

1. Connect it with an external DVD rom through USB port.
2. Login to BIOS setup and change the harddrive to compatibility mode.
3. Boot from external DVD drive with XP pro CD software
4. Get the C drive formated and start loading XP files.

So far so good until this step, however,

5. After the startup files were loaded, the system is rebooting and installation is continued.
6. When the system rebooted for the next step installation, it can not find the required files from CD software disc, it prompts me to input the path, it looks like it doesn't know what the drive letter for this external dvd drive, I tried a:, d:, e:, etc. none of them works. and the installation can not be continued. This is so weird to me.

哪位高手給些建議，應怎樣解決這個問題？

多謝！

所有跟帖： 

• 這樣 把C格式化出一個7G的FAT32分區，並且能夠啟動到 -tty- ♂ (280 bytes) () 02/22/2009 postreply 10:44:23

• 好主意！我去試試看。 -lovecd- ♂ (0 bytes) () 02/22/2009 postreply 12:55:28

• 去那個網站找了一下，沒找到可以免費下載98boot模式的連接 -lovecd- ♂ (35 bytes) () 02/22/2009 postreply 14:56:01

• 回複：去那個網站找了一下，沒找到可以免費下載98boot模式的連接 -tty- ♂ (38 bytes) () 02/22/2009 postreply 15:12:00

• 謝tty大師！隻是下載了這個文件後，怎麽能進到98係統中呢？ -lovecd- ♂ (157 bytes) () 02/22/2009 postreply 15:39:14

• 對你太複雜了，你看看這個，用USB盤安裝XP 有具體步驟 -tty- ♂ (74 bytes) () 02/22/2009 postreply 15:46:05

• 這個方法較適合我這種低手，總算裝上了。非常感謝你！ -lovecd- ♂ (0 bytes) () 02/24/2009 postreply 08:32:07