多謝您。我今天打開機器看了，make sure 唯一的硬盤設為master.

可它在"my computer" 顯示為 E 盤。I tried to change the name of the hard drive, but failed because of the displayed warning "Windows cannot modify the drive letter of your system or boot volume."

我現在install有些software時，必須先在dos中run:
subst c: e:/
to assign drive E to a virtual drive C.

我會去買個大的（500GB or 750GB?, and then partition) HD． Then I'll set the 2 disks as master and slave disks respectively. 會考慮用您建議的imaging 方法。不過會很小心，從來沒做過, and I have a lot of programs in my current hard disk in drive E.

非常感謝。

所有跟帖： 

• 明白了... -三十沒立- ♂ (454 bytes) () 10/03/2008 postreply 19:18:23

• 回複：明白了... -swj2000- ♀ (321 bytes) () 10/04/2008 postreply 17:25:01