Make sure wires are not loose. Power is reaching the drive.

來源: 色大膽小 於 2007-10-26 06:41:04 [] [博客] [舊帖] [給我悄悄話] 閱讀數 : (155 bytes)

Then reset your BIOS. (You can pull the battery on the mother board.) If after all that, you still get the same message, then your hard drive is defective.

所有跟帖： 

• 回複：Make sure wires are not loose. Power is reaching the drive. -吳雨- ♂ 給 吳雨 發送悄悄話 (52 bytes) () 10/26/2007 postreply 07:01:03

請您先登陸，再發跟帖！