回複：怎麽樣讓IBM筆記本電腦Pc recovery menu show up

Attention: All of the files on the primary hard disk partition (usually drive C)
will be lost in the recovery process. However, before any data is overwritten,
you will be given the opportunity to save one or more files to other media.

1. If possible, save all your files and shut down your operating system.
2. Turn off your computer for at least 5 seconds.
3. Turn on your computer. Watch the display carefully. While the message,
“To interrupt normal startup, press the blue ThinkVantage button” is
displayed, press the ThinkVantage button. The ThinkVantage Rescue and
Recovery workspace opens.
4. Click Restore your system and follow the instructions on the screen.

所有跟帖： 

• IBM筆記本電腦Pc recovery menu didnt show up -fffafff- ♂ (411 bytes) () 06/15/2006 postreply 14:07:24

• Is there any setting in the BIOS ? -真源湛寂- ♂ (0 bytes) () 06/15/2006 postreply 14:09:31

• did you ask the IBM? -真源湛寂- ♂ (27 bytes) () 06/15/2006 postreply 14:11:13

• I told IBM they said that they will send me the recovery CD -fffafff- ♂ (221 bytes) () 06/15/2006 postreply 14:22:01

• HA -真源湛寂- ♂ (187 bytes) () 06/15/2006 postreply 14:25:06

• 回複：Is there any setting in the BIOS ? -fffafff- ♂ (277 bytes) () 06/15/2006 postreply 14:11:31