Honda civic 2013 spark plug replaced

easy peasy replacing spark plug 2013 Honda civic, no valve cover removal, just straight to the coil ignition, take out the plug, put the new one in, and be done w it.
IN between: I had to decide to hell disregard the specialty socket that has the rubber protection, it is long ago I can’t find it; just be careful not to be idiot to break the ceremic top of the plug. I did the anti seize and the lubricant for coil connection. DO NOT OVER TIGHT THE PLUG.
car drives usual that I hope better mpg.

所有跟帖： 

• 雕蟲小技 -MoonRiverMe- ♂ (15 bytes) () 01/26/2025 postreply 04:40:13

• 不需要換 -chinomango- ♂ (0 bytes) () 01/26/2025 postreply 20:52:09

• glad I did it as the car has 120k miles and never replaced the p -leslieking- ♂ (0 bytes) () 01/27/2025 postreply 09:25:00

• 以前在11萬哩時換了火花塞，都是銥合金的，沒感覺有前後差別，後來聽說有人18萬喱也沒事，照開 -khyang86- ♂ (0 bytes) () 01/27/2025 postreply 21:30:23

• LZ貼裏的照片明顯顯示舊火花塞的gap大，對ignition coil不好。 -成功的熊- ♂ (0 bytes) () 01/28/2025 postreply 10:45:54

• gap大點，自己個兒調調不就得了？樓主的舊火花塞除了間隙，看上去沒啥大毛病，又不賽車 -mountrobson- ♂ (0 bytes) () 01/28/2025 postreply 12:48:09

• +1,況且高壓脈衝前沿很陡的 -chinomango- ♂ (0 bytes) () 01/28/2025 postreply 18:57:45

• 你得看是啥材料 -MoonRiverMe- ♂ (119 bytes) () 01/28/2025 postreply 20:03:47

• 小題大做 -mountrobson- ♂ (0 bytes) () 01/29/2025 postreply 11:21:49

• 大題小做還是小題大做廠家自有其道理 -MoonRiverMe- ♂ (135 bytes) () 01/29/2025 postreply 17:08:29

• 比較關鍵是擰到多緊。我個人經驗是用1/4 drive的torque wrench。能明顯感到墊片開始吃力，然後再轉 -成功的熊- ♂ (441 bytes) () 01/28/2025 postreply 10:59:25

• I always tighten it to spec torque -MoonRiverMe- ♂ (0 bytes) () 01/28/2025 postreply 20:06:22

• scary to do anything right ;(. happy new year everyone. -leslieking- ♂ (0 bytes) () 01/28/2025 postreply 18:57:00