網上有關高地 rotor 的 spec，Sienna similar， guess。See below's orig.:

來源: 老金工 於 2019-09-16 14:46:43 [] [舊帖] [給我悄悄話] 閱讀數 : (254 bytes)
本帖於 2019-09-16 14:50:07 時間, 由普通用戶 老金工 編輯

The standard thickness when new the front rotors are 28mm or 1.102 in. The minimum thickness before or after machining is 25.0mm or .983 in. This means you cannot take off more than about 3mm or .10 in if the rotor started at 28mm or 1.102 in.

請您先登陸，再發跟帖！