got it~ thanks

來源: 別在窗前等我 2019-05-16 14:53:36 [] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (997 bytes)
本文內容已被 [ 別在窗前等我 ] 在 2019-05-16 15:21:43 編輯過。如有問題,請報告版主或論壇管理刪除.
回答: 1k 1/4w resistor is ok as coolwin suggested.xia232019-05-16 09:59:36

the 1 , 2 and 3 led come with resistor, i need  resistor for 4 and 5 led (yellow and white color) seller call them COB. i do some test before, i change 1 2 3 led resistor into 4 and 5 and work but not enough bright。

the first led is T4.2 Neo Wedge 3528 1210-SMD Light Bulb.

yes first color  is orange and i using  meter test 351 ohm. (orange blue brown and gold)

 

所有跟帖: 

where did you buy the yellow and white translucent LEDs? -xia23- 給 xia23 發送悄悄話 xia23 的博客首頁 (183 bytes) () 05/17/2019 postreply 04:01:49

from ebay -別在窗前等我- 給 別在窗前等我 發送悄悄話 (1922 bytes) () 05/17/2019 postreply 08:23:43

kind of datasheets of 1W-100W High Power LED Chip COB Lights -xia23- 給 xia23 發送悄悄話 xia23 的博客首頁 (1433 bytes) () 05/17/2019 postreply 16:01:08

Read my 悄悄話 please, use a 7812 voltage regulator on your LEDs. -xia23- 給 xia23 發送悄悄話 xia23 的博客首頁 (942 bytes) () 05/20/2019 postreply 04:19:10

請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”