應購買什麽樣的Jack & jack stands？

對於full size pickup truck，應該買幾噸的Jack & jack stands?對於jack stands，這個噸位是兩個一起算的吧？謝謝。

所有跟帖： 

• 前幾年99刀3噸的Costco鋁頂不錯【6000lb以下空重】,支架HF鋁製的好像三幾十刀,3-4噸?忘記了 -Oneshotkill- ♂ (0 bytes) () 05/14/2019 postreply 20:39:12

• 對於皮卡，三頓夠不夠？ -ProfessionalEngineer- ♂ (0 bytes) () 05/14/2019 postreply 20:46:50

• 3噸不僅承重不夠，高度也不夠。 -TheHawk- ♂ (0 bytes) () 05/14/2019 postreply 22:34:50

• 應該買幾噸？幾高？ -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 05:30:58

• 6噸，max lift height > 22in -TheHawk- ♂ (0 bytes) () 05/15/2019 postreply 11:21:53

• Thanks -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 15:49:40

• 前幾天買了一個1.5T的，迷你van 用。 -落城一哥- ♂ (0 bytes) () 05/14/2019 postreply 22:42:58

• 是一對吧？那就算3噸，我的理解 -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 05:32:29

• 一個對我來說夠用 -落城一哥- ♂ (0 bytes) () 05/15/2019 postreply 08:13:22

• homedepot 100刀能搞到12噸鋼架結構。單個該有6噸支撐力了。 -needtime- ♂ (96 bytes) () 05/15/2019 postreply 05:54:55

• thanks -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 10:23:44

• 俺用HF的3噸鋁floor jack和6噸的stands. -傻悶登兒- ♂ (46 bytes) () 05/15/2019 postreply 07:59:06

• 是皮卡嗎？ -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 10:22:26

• full size SUV，pickup應該沒問題。再往上，俺也隻看到4噸的了。要不你就買4噸的。 -傻悶登兒- ♂ (0 bytes) () 05/15/2019 postreply 14:59:47

• Thanks! -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 15:49:58

• 3 ton jack should be enough. For jack stands, -jassco- ♂ (85 bytes) () 05/15/2019 postreply 19:13:16

• yes 6 ton for a pair. thanks. -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 19:27:30

• 3ton jack stand is enough, each only takes 30% of car weight -chinomango- ♂ (0 bytes) () 05/16/2019 postreply 21:07:16

• this is 99ton :) -zhang88- ♂ (300 bytes) () 05/18/2019 postreply 21:02:16