看了有些論壇上建議

來源: DC_Jeeper 2019-01-13 17:56:57 [] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (145 bytes)

擰oil drain plug,oil filter和wheel lug nuts都要擰到廠家建議的torque,你隻憑經驗擰是不是經常要檢查才行?

所有跟帖: 

oil drain plug就一塞子,裏麵油壓不高俺從來不用torque -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 (161 bytes) () 01/13/2019 postreply 18:07:11

你們大車tire rotation時 -DC_Jeeper- 給 DC_Jeeper 發送悄悄話 (174 bytes) () 01/13/2019 postreply 18:25:37

一個car jack一個或兩個floor stand搞掂 -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 (132 bytes) () 01/13/2019 postreply 18:51:10

幹這些從來沒用過,wheel lug nuts 鐵圈100,鋁圈80,磅ft. 車帶的扳手,基本一英尺吧, 你自重100 來磅, -bushihandyman- 給 bushihandyman 發送悄悄話 bushihandyman 的博客首頁 (0 bytes) () 01/13/2019 postreply 18:07:17

我怕over tighten 了 -DC_Jeeper- 給 DC_Jeeper 發送悄悄話 (38 bytes) () 01/13/2019 postreply 18:27:53

沒事,你要是200磅的大胖子就不要站到扳手上。 -bushihandyman- 給 bushihandyman 發送悄悄話 bushihandyman 的博客首頁 (0 bytes) () 01/13/2019 postreply 19:35:09

請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”