Honda odeyssey 2003, crankshaft pull bolt won't come loose

Holding tool does not work. Finally have to try the starter method. Still won't come loose, even broke my half inch breaker bar.

Just changed another breaker bar, took it right off!

所有跟帖： 

• 如果是下麵的，卸下輪子可以看到用大impact wrench -soccer88- ♂ (0 bytes) () 01/28/2018 postreply 14:57:09

• 電動的沒戲, 氣動的沒有. 好在現在卸下來了 -色大膽小- ♂ (0 bytes) () 01/28/2018 postreply 15:07:41

• 找朋友借一個了 -soccer88- ♂ (0 bytes) () 01/28/2018 postreply 15:15:24

• 千萬別用3/8英寸的adaptor -QYZ- ♂ (0 bytes) () 01/28/2018 postreply 16:33:36

• 這並不說明後來的break bar比第一個好，第一個不好倒是個事實 -MoonRiverMe- ♂ (0 bytes) () 01/28/2018 postreply 16:12:04

• 第一，買個好點兒的工具 -biglow- ♂ (154 bytes) () 01/28/2018 postreply 20:49:37

• 好，下回買個3尺以上的 breaker bar. -色大膽小- ♂ (0 bytes) () 01/29/2018 postreply 10:05:37

• 買根鍍鋅管子，套在break bar上 -RoseBuilder- ♂ (0 bytes) () 01/29/2018 postreply 13:24:30

• 以前常用一根掉屋頂風扇用的金屬管，也用過電線套管（這個比較軟，但是長度很長） -色大膽小- ♂ (0 bytes) () 01/29/2018 postreply 14:34:39

• 這是要換timing belt? -dvdport- ♀ (87 bytes) () 01/29/2018 postreply 09:48:25

• 是用starter method 卸下的 -色大膽小- ♂ (0 bytes) () 01/29/2018 postreply 10:04:31