N 個絕招，怎樣擰下很緊的engine oil filter

N個絕招，怎樣擰下很緊的engine oil filter
Most times the engine oil filter is not too hard to remove, but occasionally you may encounter a very difficult one. When that happens, if you can't locate your best special oil filter wrench or you don't have another driveable car to run to the store, this video should help you. It would be nice if you can make use of the tools you already have in your garage. Depending on what items you have and the kind of car you have, I will show you 4 different ways to remove a stuck engine oil filter. Again it should not cost you much. Note that your garage may have somewhat different items, in which case my video will inspire you to find your own solutions.
https://youtu.be/QPVs03aZjmc

所有跟帖： 

• If you are going to do it, then do it right the first time -車遭殃- ♂ (1361 bytes) () 03/31/2015 postreply 10:09:47

• 有這必要嗎？ -MoonRiverMe- ♂ (0 bytes) () 03/31/2015 postreply 11:22:58

• 你要是已經有了，就沒有必要。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:05:33

• 精神可嘉，方法欠佳 -MoonRiverMe- ♂ (39 bytes) () 03/31/2015 postreply 17:38:52

• filter wrench is not expensive. why make one by your self -PtLandlord- ♂ (0 bytes) () 03/31/2015 postreply 11:34:19

• if you can't find one, or if you see other people doing wrong th -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:08:03

• 視頻中的那位，純粹是吃飽撐的。 -kgb55455- ♂ (0 bytes) () 03/31/2015 postreply 11:59:55

• 買個oil filter cap就好了 walmart賣一個3刀 -violinpiano- ♂ (61 bytes) () 03/31/2015 postreply 13:05:24

• 對，要買我視頻裏的那種有兩種尺寸的。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:11:09

• 這種態度幹活。不是弄壞東西，就是自己受傷。我覺得不宜提倡。 -yanif- ♂ (0 bytes) () 03/31/2015 postreply 13:10:47

• 同意，見到很多人光用手擰，把手劃傷。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:13:44

• 你見過很多人擰這個把手劃傷？ -TBz- ♂ (99 bytes) () 03/31/2015 postreply 15:31:34

• 非常緊的，就劃傷 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:40:03

• 不錯，學習了 :-) -色大膽小- ♂ (0 bytes) () 03/31/2015 postreply 13:21:41

• 學會使用正確的工具幹活非常重要 -PtLandlord- ♂ (0 bytes) () 03/31/2015 postreply 14:11:16

• 同意。這隻是在沒有條件下的下策。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:16:24

• 帽式打滑的時候，換成一個卡鉗基本都可以解決問題。現在工具很便宜，別費那個神了。而且不安全。 -T98Kombat- ♂ (0 bytes) () 03/31/2015 postreply 16:02:16

• 對，方法很多，不要一招不靈就傻眼了，要有N招。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 16:06:57

• 沒辦法的時候值得借鑒。 -毅然- ♂ (0 bytes) () 03/31/2015 postreply 18:07:29

• 感覺您還是在國內六七十年代修修補補的精神狀態：）））沒惡意，開個玩笑。 -史迷- ♂ (200 bytes) () 03/31/2015 postreply 19:01:27

• 八十年代，有1次紋絲不動，還是一個老美教我用改錐。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 22:55:08