這是其一編程方法，很簡單。不知是否適用你的車

Instructions
1. Have a seat in your Honda and close the doors, but make sure they are unlocked.

2. Turn your ignition key to the "On" position, labeled by two lines (II). Press the "Unlock" button on your keyless remote. Turn your ignition key to the "Off" position.

3. Repeat the procedure three times, and then turn the ignition key to "On." Immediately press the "Lock" button on your keyless entry. Listen for the doors to lock, and then unlock to signal that you are in programming mode.

4. Press the "Lock" button on the keyless remote, and then turn the ignition to the "Off" position to confirm.

http://www.ehow.com/how_5523557_program-honda-keyless-entry.html

所有跟帖： 

• maybe the key can work on doors, doubt it can start engine -老生長談- ♂ (0 bytes) () 08/11/2014 postreply 14:42:38

• Start engine uses mechanical key. It is not difficult to copy a -W050404- ♂ (0 bytes) () 08/11/2014 postreply 15:47:40

• no. my engine has a chip that must match the key's -老生長談- ♂ (0 bytes) () 08/11/2014 postreply 16:16:26

• 看看這些remote+uncut blade -W050404- ♂ (129 bytes) () 08/11/2014 postreply 18:33:55

• all need to get programed -老生長談- ♂ (136 bytes) () 08/11/2014 postreply 19:41:50

• 你可以在網上找的很多如何編程、替換內置芯片等等的文章和視頻 -W050404- ♂ (0 bytes) () 08/12/2014 postreply 05:54:00

• 我就是這樣配Toyota最新的Key -W050404- ♂ (42 bytes) () 08/12/2014 postreply 05:55:51

• 非常感謝。 -老生長談- ♂ (93 bytes) () 08/12/2014 postreply 08:40:06

• Thank you so much, the webiste is helpful. -GRT- ♂ (0 bytes) () 08/11/2014 postreply 14:52:22