Update: 剛做了如下, 請幫忙分析一下子(詳情見內)

1. 用scan tool 消掉CEL code.

2. Turned on engine and let it idle for 15 minutes, everything was fine.

3. Rev the engine for about 4-5 minutes, no oil light. No rpm meter on the dashboard so don't know the rpm, probably between 2k-3k.

4. Release gas paddle and let it idle, oil light turned on.

5. Rev the engine again, oil light went away, let it idle and oil light on again, rev again and light went away again...

Any idea???

Thanks...











 

所有跟帖： 

• 問幾個基本問題 -biglow- ♂ (192 bytes) () 12/24/2013 postreply 18:02:06

• 基本上每3k-5k dino+filter, 油液麵高度正常 more info inside， 謝回複！ -tjzsm1- ♂ (512 bytes) () 12/24/2013 postreply 21:29:22

• VVW 和P0300可能是並發症，不能說明太多的問題 -biglow- ♂ (192 bytes) () 12/25/2013 postreply 11:44:16

• 可以試一試換成 Monile 1 Synthetic, 可以幫助清 -soccer88- ♂ (0 bytes) () 12/25/2013 postreply 11:57:42

• 回複：可以試一試換成 Monile 1 Synthetic, 可以幫助清 -堅茂- ♂ (94 bytes) () 01/04/2014 postreply 15:49:18