除了儀表盤，還有可能是別的問題，如VSS

有可能是VSS到表盤的接線不良。
還有可能是VSS， 車速感應器不工作。VSS壞的可能性比儀表盤要大得多。
因為在輪子邊上震動，高，低溫，水流， 等等。 工作環境惡劣。


 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com

 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com

 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com

所有跟帖： 

• 謝謝樓上兩位建議，接線不良和感受器跟換要多少費用？ -markmedown- ♀ (0 bytes) () 07/21/2013 postreply 21:37:34

• 自己修，花時間，基本不花錢。大店裏多同一個答案 -- 換儀表盤。找個小店問問價錢。 -US_CAR.- ♂ (0 bytes) () 07/21/2013 postreply 22:03:52

• 謝謝 -markmedown- ♀ (0 bytes) () 07/21/2013 postreply 22:39:39

• 你若不能自摸，那就隻能找人或找店修。 -事後諸葛- ♂ (169 bytes) () 07/21/2013 postreply 22:41:33

• 是我跟不上形勢了還是時代變化太快， 什麽是"自摸"? -老生長談- ♂ (0 bytes) () 07/23/2013 postreply 08:25:58

• VSS管cruise control -MoonRivertttt- ♂ (45 bytes) () 07/21/2013 postreply 23:06:51

• Okey, use cruise control to test VSS, thanks -markmedown- ♀ (0 bytes) () 07/22/2013 postreply 12:25:29