"Crankshaft pulley bolt 時怎麽知道已達到215nm" -----You have use torque

torque wrench

http://www.sears.com/craftsman-micro-clicker-torque-wrench-3-8inch-drive/p-00931423000P?prdNo=3&blockNo=3&blockType=G3

 

"把皮帶輪轉到0”是否就是Setting No.1 Cylinder to TDC? “上止點” = TDC"

沒錯，不過在0時是壓縮行程完成以後的上止點，compression top dead center.TDC也可以是排氣行程的 上止點，隻有在0時才是compression top dead cente。

所有跟帖： 

• Thanks. Since it is aligned to "0" what are the "15 10 5" marks -Gulang- ♂ (0 bytes) () 02/22/2013 postreply 17:47:51

• They are timing marks -MoonRivertttt- ♂ (330 bytes) () 02/23/2013 postreply 05:36:15

• 多謝釋疑。換了timing belt 後 gas mileage 會有變化嗎? -Gulang- ♂ (0 bytes) () 02/24/2013 postreply 17:07:53

• 應該不會因為Timing不應該改變， 不過我沒有記錄 -MoonRivertttt- ♂ (0 bytes) () 02/25/2013 postreply 15:33:52

• Thanks. All posts are very helpful. -Gulang- ♂ (0 bytes) () 02/26/2013 postreply 19:20:50