It is easy DIY

來源: 毅然 於 2011-02-14 18:37:46 [] [舊帖] [給我悄悄話] 閱讀數 : (494 bytes)
回答: 手刹燈不亮了. 由 無影腿 於 2011-02-14 08:35:19

If you means the warning light on instrument panel, it is easy to fix it yourself.

Use a screw driver to loosen 2 or 3 screws on the intrument panel. then the panel can be taken off, you can see a curcit board. disconnect a wire connector, the board is free now. the brake warning light is a tiny bulb. buy a replacement bulb, put in on, and put everything back. If you have the bulb on hand, the whole process takes about 15 minutes. I have replaced a turn signal bulb this way.

所有跟帖： 

• Thanks. I will try to do it myself. -無影腿- ♂ 給 無影腿 發送悄悄話 (0 bytes) () 02/15/2011 postreply 04:16:39

• 別急,先搞清是哪的問題. 1)表盤上的LED指示燈壞, 換燈; 2)手刹處的接觸開關壞,一般為接觸不良.如果是2),不修也無妨, -3DMan- ♂ 給 3DMan 發送悄悄話 (0 bytes) () 02/15/2011 postreply 05:58:04

• Thank you so much for the information. -無影腿- ♂ 給 無影腿 發送悄悄話 (0 bytes) () 02/15/2011 postreply 09:46:26

• smart way. -3DMan- ♂ 給 3DMan 發送悄悄話 (0 bytes) () 02/15/2011 postreply 20:58:30

• Thank you very much! -無影腿- ♂ 給 無影腿 發送悄悄話 (0 bytes) () 02/17/2011 postreply 11:48:33

請您先登陸，再發跟帖！