check cylinder pressure is best option for now.

來源: 順序是否有要求 於 2010-12-30 09:30:01 [] [舊帖] [給我悄悄話] 本文已被閱讀： 次 (186 bytes)
回答: First of all 由 biglow 於 2010-12-29 21:33:25

However, if your friend did not try to start by cranking the starter, the valves will be ok, just replace timing belt.  Otherwise , it will be a valve job.

Good luck.

所有跟帖： 

• thanks a lot! unfortunely I did that for many times. -triangle- ♂ 給 triangle 發送悄悄話 (42 bytes) () 12/30/2010 postreply 11:12:34

• 回複：thanks a lot! unfortunely I did that for many times. -順序是否有要求- ♂ 給 順序是否有要求 發送悄悄話 (314 bytes) () 12/30/2010 postreply 19:26:33

• Replacing pistons is very easy once you removed the engine head. -buddy1234567us- ♂ 給 buddy1234567us 發送悄悄話 (378 bytes) () 12/30/2010 postreply 21:06:02

請您先登陸，再發跟帖！

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”