回複：請問一下，好不好換 pads and rotors?

來源: Yangtze430030 於 2010-09-17 10:14:39 [] [舊帖] [給我悄悄話] 閱讀數 : (743 bytes)
回答: 請問一下，好不好換 pads and rotors? 由 verilog 於 2010-09-17 09:34:06

It's extremely easy to change front rotors and pads. If you change the pads and no vibration then you do not have to do anything to the rotors. If brakes vibrate then you need to do either of the following;

1. If you rotors never resurfaced before, meaning ithey have enough thickness, ask a shop to re-surface your rotors for probably $10-15 per rotor and then install new pads by yourself;

2. If your rotors had been resurfaced before, just buy new rotors and pads and install them by yourself.

Do not ask dealers to resurface since it's the most costly option. If you can not find any shop to turn the rotors for you, just buy new ones and they are much cheaper comparing to dealer resurfacing or replacing rotors.

所有跟帖： 

• thank you very much. Excellent advice. -verilog- ♂ 給 verilog 發送悄悄話 verilog 的博客首頁 (227 bytes) () 09/17/2010 postreply 11:59:32

• If brake light is on, you may need brake fluid. -BigV8- ♂ 給 BigV8 發送悄悄話 (567 bytes) () 09/17/2010 postreply 12:20:24

• brake fluid is fine. break light is on and off! -verilog- ♂ 給 verilog 發送悄悄話 verilog 的博客首頁 (283 bytes) () 09/17/2010 postreply 12:56:42

• Does the car has pad sensors? If not, -BigV8- ♂ 給 BigV8 發送悄悄話 (168 bytes) () 09/17/2010 postreply 13:46:53

• good question! -verilog- ♂ 給 verilog 發送悄悄話 verilog 的博客首頁 (231 bytes) () 09/17/2010 postreply 13:55:20

• Dealer mechanic knows everything. What they recommend is -BigV8- ♂ 給 BigV8 發送悄悄話 (149 bytes) () 09/17/2010 postreply 14:03:17

• I see, thank you. Will check it this weekend! -verilog- ♂ 給 verilog 發送悄悄話 verilog 的博客首頁 (0 bytes) () 09/17/2010 postreply 14:21:00

請您先登陸，再發跟帖！