回複：請問各位大俠: 換TIMIG BELT 為什麽要 TDC?

1) turn your crankshaft pulley clockwise, and looking at your camshaft pulley at same time, if camshaft pulley point to mark that means your crank shaft pulley is on the mark or pretty close to mark. you need to carefully look at your crank shaft pulley, there is a V dent on it which will line up with the mark on the plastic cover.
2) make a mark on your belt , copy to your new belt, otherwise you may miss one teeth or 2 teeth.
3) remove crank shaft pullet bolt , you can either use impact gun if you have room, or you can use chain wrench which work perfect for me.or you can use starter way to remove it or you can insert big screwdrive into flywheel....

所有跟帖： 

• Thanks a lot! -iammadaboutu- ♂ (0 bytes) () 10/20/2009 postreply 10:42:55

• 回複：回複：請問各位大俠: 換TIMIG BELT 為什麽要 TDC? -victormao- ♂ (314 bytes) () 10/20/2009 postreply 11:28:48

• Thanks alot! -iammadaboutu- ♂ (0 bytes) () 10/20/2009 postreply 12:12:15