Go to a tools store like Harbor Freight or Sears to buy a tool..

來源: internuts 於 2009-09-27 10:58:58 [] [博客] [舊帖] [給我悄悄話] 閱讀數 : (389 bytes)

they have tools to take the rounded nuts out. At Sears, Craftsman makes a tool called "Bolt-Out", specifically for your case.

I'd recommend you to buy a set of good tools, like "Craftsman", lifetime warranty, to make DIY easier. With those cheapy ones people are more likely to mess up bolts/parts which makes one's life more miserable...

Save labor cost, not tools.

所有跟帖： 

• Thanks, I will go for one. I was using the tools with -不懂就問唄- ♂ 給 不懂就問唄 發送悄悄話 (31 bytes) () 09/27/2009 postreply 11:02:26

• 假如是鏽住了，務必噴液再擰！若是六角螺帽擰滑了，買那個工具！ -南京之友- ♂ 給 南京之友 發送悄悄話 南京之友 的博客首頁 (124 bytes) () 09/27/2009 postreply 11:12:03

• 鏽個鬼耶，放油的螺絲不會鏽 -狼主- ♀ 給 狼主 發送悄悄話 (0 bytes) () 09/28/2009 postreply 07:48:20

• 1.樓主不會擰螺絲 2.大概用了活扳子 3.照Tbz的做 -狼主- ♀ 給 狼主 發送悄悄話 (0 bytes) () 09/28/2009 postreply 07:52:16

• 懂個鬼啊，裏麵不鏽外部鏽，尤其是冬天下雪撒鹽以後！ -南京之友- ♂ 給 南京之友 發送悄悄話 南京之友 的博客首頁 (0 bytes) () 09/29/2009 postreply 08:11:28

請您先登陸，再發跟帖！