yeah I did. Still too tight though

來源: xxhhwxc 於 2009-08-18 08:58:21 [] [舊帖] [給我悄悄話] 閱讀數 : (310 bytes)

Finally I had to use regular 6-point socket to remove it.

This is how I did it: I cut the wire off and then used a plier to remove the tip of the oxygen sensor(since it is bad anyway) so I could use the solid socket. I turned the handle very hard and the sensor was finally loosened after a loud noise.

請您先登陸，再發跟帖！