He probably left out details, like to soak with PB blast etc.

來源: 色大膽小 於 2009-08-17 10:11:10 [] [博客] [舊帖] [給我悄悄話] 本文已被閱讀： 次 (161 bytes)
It is probably very tight on there, nearly welded.

I would recommend to soak with PB Blast and wait for 10 or more minutes before attempting to remove it.

所有跟帖： 

• Put anti-sized compound on the thread before screw the new one. -色大膽小- ♂ 給 色大膽小 發送悄悄話 色大膽小 的博客首頁 (0 bytes) () 08/17/2009 postreply 10:12:43

• Yep, all good tips -internuts- ♂ 給 internuts 發送悄悄話 internuts 的博客首頁 (0 bytes) () 08/17/2009 postreply 10:36:45

• I did't do that. But in case not able to unscrew... -丁莊秀園- ♂ 給 丁莊秀園 發送悄悄話 丁莊秀園 的博客首頁 (0 bytes) () 08/17/2009 postreply 11:08:34

請您先登陸，再發跟帖！

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”