請教：保養新手，Jackstand都不會用

在這看了保養的介紹，就買來了Jack Stand和Floor Jack。

我的車(Civic)的手冊上隻有講如何用頂起來換台。但是如何頂起來換上Jack Stand沒有講。可以訂的地方很小，頂起來後沒法把Jack stand替換上去。

在youtube上搜jack stand， floor jack，講的都是4WD、Truck，好像那些車下很多地方可以頂。看來看Civic的底盤，不知道裏輪子附近哪裏是結實的地方。

高手不要笑，請多多指教

所有跟帖： 

• 鼓勵DIY, 千萬注意安全 -TBz- ♂ (241 bytes) () 03/20/2009 postreply 00:58:29

• better use car ramp -newpeople- ♀ (0 bytes) () 03/20/2009 postreply 06:45:49

• some diyers were crushed by their car. Nothing precious than you -fixanycars- ♀ (213 bytes) () 03/20/2009 postreply 09:10:46

• Nothing precious than your life. -fixanycars- ♀ (0 bytes) () 03/20/2009 postreply 09:16:28

• I always use two jackstands at a time -internuts- ♂ (0 bytes) () 03/20/2009 postreply 09:38:59

• parking brake doesn't lock front wheels.回複：I always use two jack -fixanycars- ♀ (137 bytes) () 03/20/2009 postreply 09:50:10

• I always put a stopper (wedge) at the other end (outer) -internuts- ♂ (0 bytes) () 03/20/2009 postreply 10:25:32

• because u r not a new diyer.回複：I always put a stopper (wedge) at -fixanycars- ♀ (0 bytes) () 03/20/2009 postreply 10:47:39