謝謝花椒、OregonRain、internuts，不過我的首要問題沒有回答

我先要搞清楚要買什麽工具，然後再是牌子、地方。

比如torque wrench是否要，有的bolt要用80 in-lbs，有的要用100 ft-lbs，差距挺大，是不是很多個？

關鍵的工具有什麽？怎樣的套件就比較合適了？

所有跟帖： 

• Torque wrench 一般都是客調整的 -mOVEOVER- ♂ (253 bytes) () 03/09/2009 postreply 17:14:29

• 書念多了。 -北航新保理英子- ♀ (0 bytes) () 03/09/2009 postreply 17:47:37

• 貼錯行了 -北航新保理英子- ♀ (0 bytes) () 03/09/2009 postreply 17:48:09

• 男怕貼錯行了， 女怕嫁錯郎。 -北航新保理英子- ♀ (0 bytes) () 03/09/2009 postreply 19:04:12

• Here is a general guideline -internuts- ♂ (1421 bytes) () 03/09/2009 postreply 19:07:05

• correction: (7) socket drives: - you can remove 1/2" drive -internuts- ♂ (115 bytes) () 03/09/2009 postreply 19:16:04

• ratchet -北航新保理英子- ♀ (0 bytes) () 03/09/2009 postreply 20:08:11

• yeah, rachet = socket drives -internuts- ♂ (0 bytes) () 03/09/2009 postreply 21:31:31

• 21mm -北航新保理英子- ♀ (0 bytes) () 03/09/2009 postreply 20:09:35

• this can be used but rarely. i haven't used it yet -internuts- ♂ (0 bytes) () 03/09/2009 postreply 21:32:47

• 回複：this can be used but rarely. i haven't used it yet -Arkang- ♂ (45 bytes) () 03/09/2009 postreply 22:01:11

• good point. mine MB log nuts are 17mm -internuts- ♂ (0 bytes) () 03/09/2009 postreply 22:07:32

• when you take care of the subframe, suspention arms -jingwei-wang- ♂ (0 bytes) () 03/10/2009 postreply 09:39:24

• 對不起,工具是男人的"事".我不懂.我隻看到家裏工具的牌子 :-) -OregonRain- ♀ (0 bytes) () 03/10/2009 postreply 12:54:12