看看車庫門咋辦:自辦如何辦,找人如何辦?
家灘handymen, 老汗給你們一個用武之地
所有跟帖:
• 不是說要把繩子剪短以免壞人偷盜嗎? -julie116- ♀ (0 bytes) () 04/08/2023 postreply 10:53:52
• 找人了,彈簧麻煩 -胡雪鹽8- ♂ (0 bytes) () 04/08/2023 postreply 10:54:55
• buy one spring and replace the broken one? -laoxuliang- ♀ (0 bytes) () 04/08/2023 postreply 10:57:13
• 請人幹吧 -longnv- ♀ (0 bytes) () 04/08/2023 postreply 11:21:22
• 術業有專攻,我們這個年齡了,還是讓專業人員來做這些專業的事情吧? -9876543- ♀ (0 bytes) () 04/08/2023 postreply 11:27:23
• 我家車庫門當年是自己安的 模糊記得安2邊彈簧的自己能幹 1個彈簧的危險 容易傷人 要專業安 -hhhh- ♀ (0 bytes) () 04/08/2023 postreply 11:27:40
• 這種錢還是不要冒險去省了。我家剛剛修過。 -田園式生活- ♀ (0 bytes) () 04/08/2023 postreply 11:31:58
• 這活掃地老頭年輕時幫人幹過 -Versailles- ♂ (356 bytes) () 04/08/2023 postreply 11:40:59
• 我做過三四個,建議你還是請人 -xiangbuming- ♂ (0 bytes) () 04/08/2023 postreply 11:42:16
• 可自己做。買2新彈簧,2bar。用bar交替插邊上的孔,把彈簧繞7.5圈+鎖緊螺絲就好了 -位酷哥- ♂ (0 bytes) () 04/08/2023 postreply 12:29:49
• 我做過好幾個。WindingBar$12,TensionSpring$50-60,找人$500-700幾年前價 -位酷哥- ♂ (0 bytes) () 04/08/2023 postreply 12:31:14
• $100 -laoxuliang- ♀ (0 bytes) () 04/08/2023 postreply 13:35:17