正文

Auto Body Dent Repair

(2007-10-30 09:26:37) 下一個
Introduction
A small dent can be pulled out with little difficulty.
Instructions
Difficulty: Moderate
Steps
1
Step One
Drill a hole in the center of the dent.
2
Step Two
Insert a dent pulling tool in the hole.
3
Step Three
Pull on the tool until the dent pops out or appears flat.
4
Step Four
Remove the dent pulling tool.
5
Step Five
Crawl under the car with a metalworking hammer and a dolly (see Glossary).
6
Step Six
Bang out the back of the dent carefully until smooth.
7
Step Seven
Fill the hole with body filler.
8
Step Eight
Cover the area with touch-up paint.
Tips & Warnings

* Large dents may be more easily fixed by replacing an entire body panel.
* If the dent is on a fender, be careful not to pop the tire when drilling.

http://www.ehow.com/how_3379_fix-dent-car.html
[ 打印 ]
閱讀 ()評論 (0)
評論
目前還沒有任何評論
登錄後才可評論.