P0301 Misfire Detected in #1 Cylinder

Please forgive me as I can not type Chinese on the PC I am using.

Background:  About a year ago I replaced the 4 spark plugs for my 2012 Subaru Legacy. It took me a while to unscrew the old spark plugs and took them out but when I tightened the new spark plugs pretty soon I felt it was already tight and I did not go any further because I did not want to overtighten them.  Several days alter my check engine light was on and the code was P0301 Misfire Dected in #1 Cylinder. I tried to tighten the spark plug again but it was still pretty tight so I just erased the code and the car was running fine for about a year. 

recently the code P0301 came back again and if I erased it the check engine light will turn on again the next day. Now what can I do? I can bring the car to a dealership but just feel it is stupid if the problem is the spark plug is not tighten enough. Should I just try unscrewing the spark plug and tightening it again and see how it goes?  Or should i just let a mechanic to handle it?

 

Thanks!

所有跟帖: 

Swap it with another see if you get the same code -acac- 給 acac 發送悄悄話 (0 bytes) () 09/05/2024 postreply 16:09:20

you mean swap spark plugs? for example switching 1 and 2? -ymmud- 給 ymmud 發送悄悄話 (0 bytes) () 09/05/2024 postreply 18:44:58

最好用torque wrench按Spec上緊,但是你的問題不像是沒上緊吧。 -老九不能走- 給 老九不能走 發送悄悄話 老九不能走 的博客首頁 (0 bytes) () 09/05/2024 postreply 16:12:55

harbor的小力矩絕對不行,amazon的UYECOVE還不錯 -chinomango- 給 chinomango 發送悄悄話 chinomango 的博客首頁 (0 bytes) () 09/07/2024 postreply 18:02:22

第一,Engine哆嗦嗎 -biglow- 給 biglow 發送悄悄話 biglow 的博客首頁 (267 bytes) () 09/05/2024 postreply 18:44:19

no shaking or exessive vibration. Should I still check coil? -ymmud- 給 ymmud 發送悄悄話 (0 bytes) () 09/05/2024 postreply 18:46:11

can the fuel line clogged causing not enough fuel? -leslieking- 給 leslieking 發送悄悄話 (0 bytes) () 09/05/2024 postreply 20:48:00

換一下1和2的Coil看看;跑了多少邁了?可能Coil該換了 -soccer88- 給 soccer88 發送悄悄話 soccer88 的博客首頁 (0 bytes) () 09/05/2024 postreply 21:22:20

一年多沒事,大概率不是鬆緊的問題,最忌火花塞擰過頭;單缸失火有兩個最大可能,火花塞和點火線圈, 找一個對照缸,分別調換 -mountrobson- 給 mountrobson 發送悄悄話 (235 bytes) () 09/06/2024 postreply 08:14:48

thanks, will do -ymmud- 給 ymmud 發送悄悄話 (0 bytes) () 09/06/2024 postreply 09:15:24

點火線圈或你擰花了 -chinomango- 給 chinomango 發送悄悄話 chinomango 的博客首頁 (0 bytes) () 09/07/2024 postreply 18:02:48

also got both P0301 and P0303 at one time -ymmud- 給 ymmud 發送悄悄話 (111 bytes) () 09/06/2024 postreply 09:14:22

focus on 301 first, 303 might be caused from it -mountrobson- 給 mountrobson 發送悄悄話 (0 bytes) () 09/06/2024 postreply 09:36:21

請您先登陸,再發跟帖!