Hi friends, any idea what caused the scratches

來源: Leo5568 2024-04-30 12:25:13 [] [博客] [舊帖] [給我悄悄話] 本文已被閱讀: 次 (4110126 bytes)
本文內容已被 [ Leo5568 ] 在 2024-04-30 12:33:53 編輯過。如有問題,請報告版主或論壇管理刪除.

on the rim? The other half is fine.

所有跟帖: 

curb rash -2ndGear- 給 2ndGear 發送悄悄話 (50 bytes) () 04/30/2024 postreply 12:45:25

That is right. I never seriously practiced parallel parking, -Leo5568- 給 Leo5568 發送悄悄話 Leo5568 的博客首頁 (218 bytes) () 04/30/2024 postreply 13:15:44

右側前車輪吧!你停車離馬路牙子太近了,蹭的,輪轂是鋁合金的,軟的很,蹭一次,轉一圈就會這樣了 -mountrobson- 給 mountrobson 發送悄悄話 (0 bytes) () 04/30/2024 postreply 12:59:02

It is right rear, probably it was right front and later -Leo5568- 給 Leo5568 發送悄悄話 Leo5568 的博客首頁 (277 bytes) () 04/30/2024 postreply 13:19:44

這麽明顯的錯誤都後知後覺 -薩克斯風- 給 薩克斯風 發送悄悄話 (21 bytes) () 04/30/2024 postreply 13:52:31

I love/take care of everything, just didn't expect the rim -Leo5568- 給 Leo5568 發送悄悄話 Leo5568 的博客首頁 (276 bytes) () 04/30/2024 postreply 14:15:03

There are Mobile Wheel Repair Companies to fix if you care… -老金工- 給 老金工 發送悄悄話 (0 bytes) () 04/30/2024 postreply 15:21:08

That SOB must be having menopause picking on everyone -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 MoonRiverMe 的博客首頁 (0 bytes) () 05/01/2024 postreply 04:46:43

it apparently was scraped by curb -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 MoonRiverMe 的博客首頁 (76 bytes) () 04/30/2024 postreply 13:29:50

I just checked the tires they look okay. I couldn't remember -Leo5568- 給 Leo5568 發送悄悄話 Leo5568 的博客首頁 (67 bytes) () 04/30/2024 postreply 13:55:24

Thanks everyone for the information and advice! The people -Leo5568- 給 Leo5568 發送悄悄話 Leo5568 的博客首頁 (196 bytes) () 04/30/2024 postreply 16:29:16

沒必要感覺不好,每個人都會有這個問題,早晚而已,一般隻會蹭花輪轂,能傷到輪胎的話,你肯定能感覺到 -mountrobson- 給 mountrobson 發送悄悄話 (0 bytes) () 05/01/2024 postreply 08:09:46

曾見過鄰居order專業修複師幹這個活,找了一個修複網圖 -老金工- 給 老金工 發送悄悄話 (155 bytes) () 05/01/2024 postreply 09:09:59

是這樣修的 -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 MoonRiverMe 的博客首頁 (107 bytes) () 05/01/2024 postreply 19:33:03

是我的話,會先用較粗些點砂紙打磨平劃痕,再用bodyFiller時就好找平,不過真是看個人技巧和耐性 -mountrobson- 給 mountrobson 發送悄悄話 (0 bytes) () 05/02/2024 postreply 08:27:51

抹filler之前必定要磨平凸出的地方,這不難,難的是噴漆 -MoonRiverMe- 給 MoonRiverMe 發送悄悄話 MoonRiverMe 的博客首頁 (66 bytes) () 05/03/2024 postreply 07:38:21

難的是車身補漆,如何與外部融合過渡,Feathering in 而無硬邊界,輪轂翻新噴漆肯定全麵重噴了 -mountrobson- 給 mountrobson 發送悄悄話 (0 bytes) () 05/03/2024 postreply 09:42:34

可以安裝AlloyGator 原裝車輪保護器,保護你的鋼圈。 -man008- 給 man008 發送悄悄話 (0 bytes) () 05/01/2024 postreply 13:07:41

請您先登陸,再發跟帖!

發現Adblock插件

如要繼續瀏覽
請支持本站 請務必在本站關閉/移除任何Adblock

關閉Adblock後 請點擊

請參考如何關閉Adblock/Adblock plus

安裝Adblock plus用戶請點擊瀏覽器圖標
選擇“Disable on www.wenxuecity.com”

安裝Adblock用戶請點擊圖標
選擇“don't run on pages on this domain”